Section 1: Identification of the substance/mixture and of the company/undertaking:

1.1. Product identifier : Product name: Morris Clean formulated Powder.
1.2. Relevant identified uses of the substance or mixture and uses advised against.
1.3. Details of the supplier of the safety data sheet:
Company name: Morris Clean UK Ltd.
Unit 33, Patrick Stirling Court, Doncaster. DN4 United Kingdom.
Tel: +447404 899 903, Email:
1.4. Emergency telephone number: +447404 899903.

Section 2: Hazards identification:

2.1. Classification of the substance or mixture:
Classification under CLP: This product has no classification under CLP.
2.2. Label elements: This product has no label elements.
2.3. Other hazards: PBT: This product is not identified as a PBT/vPvB substance.

Section 3: Composition/information on ingredients:

3.1. Mixtures: Contains Fragrance.

Section 4: First aid measures:

4.1. Description of first aid measures – Skin contact: Wash immediately with plenty of soap and water.
Eye contact: Bathe the eye with running water for 15 minutes.
Ingestion: Washout mouth with water.
Inhalation: Consult a doctor.
4.2. Most important symptoms and effects, both acute and delayed – Skin contact: There may be mild irritation at the site of contact.
Eye contact: There may be irritation and redness.
Ingestion: There may be irritation of the throat.
Inhalation: No symptoms.
4.3. Indication of any immediate medical attention and special treatment needed Immediate/special treatment: Not applicable.

Section 5: Fire-fighting measures:

5.1. Extinguishing media: Suitable extinguishing media for the surrounding fire should be used. Use water spray to cool containers.
5.2. Special hazards arising from the substance or mixture – Exposure hazards: In combustion emits toxic fumes.
5.3. Advice for fire-fighters: Wear self-contained breathing apparatus. Wear protective clothing to prevent contact with skin and eyes.

Section 6: Accidental release measures:

6.1. Personal precautions, protective equipment and emergency procedures: Refer to section 8 of SDS for personal protection details. Turn leaking containers leak-side up to prevent the escape of liquid.
6.2. Environmental precautions: Do not discharge into drains or rivers. Contain the spillage using bunding.
6.3. Methods and material for containment and cleaning-up procedures: Absorb into dry earth or sand. Transfer to a closable, labelled salvage container for disposal by an appropriate method.
6.4. Reference to other sections: Refer to section 8 of SDS.

Section 7: Handling and storage:

7.1. Precautions for safe handling–Handling requirements: Avoid direct contact with the substance. Ensure there is sufficient ventilation of the area.
7.2. Conditions for safe storage, including any incompatibilities – Storage conditions: Store in a cool, well-ventilated area. Keep container tightly closed.
7.3. Specific end use(s): No data available.

Section 8: Exposure controls/personal protection:

8.1. Control parameters – Workplace exposure limits: No data available.
8.2. DNEL/PNEC Values – DNEL / PNEC: No data available.
8.3. Exposure controls – Engineering measures: Ensure there is sufficient ventilation of the area.
Respiratory protection: Respiratory protection not required.
Hand protection: Protective gloves.
Eye protection: Safety glasses. Ensure eye bath is to hand.

Section 9: Physical and chemical properties:

9.1. Information on basic physical and chemical properties–State: Powder.
Colour: None.
Odour: Pleasant.
Solubility in water: Soluble.
Ph=10.6 (weak alkaline).
9.2. Other information: No data available.

Section 10: Stability and reactivity:

10.1. Reactivity: Stable under recommended transport or storage conditions.
10.2. Chemical stability: Stable under normal conditions.
10.3. Possibility of hazardous reactions: Hazardous reactions will not occur under normal transport or storage conditions. Decomposition may occur on exposure to conditions or materials listed below.
10.4. Conditions to avoid: Heat.
10.5. Incompatible materials – Materials to avoid: Strong oxidising agents. Strong acids.
10.6. Hazardous decomposition products: In combustion emits toxic fumes.

Section 11: Toxicological information:

11.1. Information on toxicological effects – Toxicity values: No data available.
11.2. Symptoms / routes of exposure – Skin contact: There may be mild irritation at the site of contact.
Eye contact: There may be irritation and redness.
Ingestion: There may be irritation of the throat.
Inhalation: No symptoms.

Section 12: Ecological information:

12.1. Toxicity – Ecotoxicity values: No data available.
12.2. Persistence and degradability: Biodegradable.
12.3. Bioaccumulative potential: No bioaccumulation potential.
12.4. Mobility in soil: Readily absorbed into soil.
12.5. Results of PBT and vPvB assessment – PBT identification: This product is not identified as a PBT/vPvB substance.
12.6. Other adverse effects: Negligible ecotoxicity.

Section 13: Disposal considerations:

13.1. Waste treatment methods – Disposal operations: Transfer to a suitable container and arrange for collection by specialised disposal company.
NB: The user’s attention is drawn to the possible existence of regional or national regulations regarding disposal.

Section 14: Transport information:

Transport class: This product does not require a classification for transport.

Section 15: Regulatory information:

15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture.
Specific regulations: Not applicable.
15.2. Chemical Safety Assessment: Not applicable”.

Section 16: Other information:

This safety data sheet is prepared in accordance with Commission Regulation (EU) No 453/2010.

* indicates text in the SDS which has changed since the last revision.
Legal disclaimer: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. This company shall not be held liable for any damage resulting from handling or from contact with the above product.

Please Note* Morris Clean UK formulated powder has been specifically designed to be used with water. Therefore, Morris Clean UK Formulated powder cannot be used as a cleaning Product in powdered form.

One mixed with water as directed ph=10.6 (weak alkaline). The recommended mixing dilutions are as follows:

One Sachet (4 grams) of Morris Clean UK formulated powder to 500ml of water. If you have any allergic allergies, please wear gloves.

For more information & cleaning instructions please visit

MSDS Diluted form = 1 sachet to a minimum of 500ml of water Download Here

MSDS Powder Form (please note* Mighty101 cannot be used in powder form and must be diluted with tap water)

MSDS Powder form Download Here